GDJY-100 Transformer Oil Test Equipment Insulating Oil BDV Tester Calibration Device
Product Description
GDJY-100 Transformer Oil Test Equipment Insulating Oil BDV Tester Calibration Device
1. Introduction
The GDJY-100 Transformer Oil Test Equipment Insulating Oil BDV Tester Calibration Device can complete the detection of the breakdown voltage, boost rate and waveform distortion of the dielectric oil dielectric strength tester, and automatically report the test results.
The GDJY-100Insulating Oil BDV Tester Calibration Device uses the voltage at the instant of breakdown of the dielectric oil dielectric strength tester as the basis for detection, and calculates the error of the instrument, which is more intuitive, accurate and effective than the conventional steady-state calibration method.
2. Technical Index
| 1 | Maximum measuring voltage | 100kV (-50kv ~ 50kv, no breakdown control box connected) |
| 2 | High voltage measurement error | <0.2%RDG+0.04kv |
| 3 | High voltage rise rate measurement error | <0.5% |
| 4 | Time reading resolution | 39us |
| 5 | Power supply | AC220V±10% 50Hz/60Hz |
| 6 | Highest breakdown voltage | 80kv |
| 7 | Voltage divider capacitance value | 10pf, the highest measurement voltage: 50kv (50Hz/60Hz) |
| 8 | Breakdown control box allows maximum input voltage | 80kV |
3. Application Field
Steady-state error check of dielectric strength tester of insulating oil
Breakdown error check of dielectric strength tester
Voltage boost rate verification of dielectric strength tester
Waveform distortion rate verification of dielectric strength tester
4. Characteristics
The hardware and software features of the insulating oil Tester calibration device include:
1) Using the active breakdown method, constructing the breakdown condition at the specified point to detect the breakdown voltage reading error of the test article.
2) Display the output voltage waveform of the test object in real time, record the voltage waveform of the test product at the moment of breakdown. It is more convenient to analyze the cut-off time of the test article.
3) Two high-voltage signals of the dielectric oil tester can be simultaneously detected by two high-voltage signal sampling.
4) The device can automatically generate format specification WORD test report.
5) Test environment settings and instrument settings are automatically saved.
6) Test parameters of various tests can be automatically calculated.
7) Plot test curves in real time, and provide a variety of curve analysis tools, allowing users to arbitrarily zoom and position the curve.
5. Our Partners
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com