English
 |
| Quantity: | |
|---|---|
GDRZ-902
GOLD
9030849000
GDRZ-902
Transformer SFRA Sweep Frequency Response Analyzer
Introduction
The structure and reference of the transformer is fixed after been made, Therefor, the frequency response of each winding will be almost the same normally.
Some case such as cut off between circles or phases in experience, cut off or winding moved for the pull of power in running, winding moved for hit in transportation, could change the reference of the transformer ,of which the frequency response will be changed, we could detect the deformation according to the frequency response curve.
GDRZ-902 Transformer SFRA Sweep Frequency Response Analyzer could draw the frequency response curve accurately. Then we compare the curves horizontally or vertically to detect the deformation of the transformer.
GDRZ-902 Transformer SFRA Sweep Frequency Response Analyzer is conformed to the standard of DL/T911 2004.
Application
1. During routine test of power transformer maintenance, our GDRZ-902 Transformer Sweep Frequency Response Analyzer SFRA is used to check the frequency response data of transformer winding.
2. When the power transformer leaves the factory, our GDRZ-902 Transformer SFRAt is used to measure the winding frequency response data of the transformer as the characteristic fingerprint information of the transformer.
3. After the power transformer is short-circuited, our GDRZ-902 Transformer Sweep Frequency Response Analyzer is used to measure the frequency response data of the power transformer and compare it with the test data before the short-circuit to check whether the transformer windings are deformed.
Specifications
| GDRZ-902 Transformer SFRA Sweep Frequency Response Analyzer | |
| Two different sweep modes: Linear sweep, Section sweep | |
| Linear sweep | 0.5KHZ-1MHZinterval 0.5KHZ 2000 dots |
Section sweep | 50HZ-100HZinterval 2HZ25 dots |
| 100HZ-1KHZinterval 20HZ45 dots | |
| 1KHZ -10KHZinterval 50HZ180 dots | |
| 10KHZ-100KHZinterval 0.2KHZ 450 dots | |
| 100KHZ – 500KHZ interval 0.5KHZ 800 dots | |
| 500KHZ – 1000KHZ interval 1KHZ500 dots | |
| Test range | (-100dB) - (+20dB) |
| Test accuracy | 0.1dB |
| Frequency accuracy | <0.01% |
| Signal input impedance | >1M Ω |
| Signal output impedance | 50 Ω |
Main Features
No need to connect to a laptop, a single machine can complete the frequency response transformer winding deformation test.
The sweep frequency range can reach 10HZ-10MHZ, the output frequency is stable, and the response attenuation multiplier has high measurement accuracy.
According to the test results, automatic production of standardized Word test reports.
Equipped with a micro printer to print test curves and data.
Automatic evaluation of test results in accordance with IEC60076-18.
7-inch large screen touch screen, full English menu interface, simple operation.
Our Partners
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com
GDRZ-902
Transformer SFRA Sweep Frequency Response Analyzer
Introduction
The structure and reference of the transformer is fixed after been made, Therefor, the frequency response of each winding will be almost the same normally.
Some case such as cut off between circles or phases in experience, cut off or winding moved for the pull of power in running, winding moved for hit in transportation, could change the reference of the transformer ,of which the frequency response will be changed, we could detect the deformation according to the frequency response curve.
GDRZ-902 Transformer SFRA Sweep Frequency Response Analyzer could draw the frequency response curve accurately. Then we compare the curves horizontally or vertically to detect the deformation of the transformer.
GDRZ-902 Transformer SFRA Sweep Frequency Response Analyzer is conformed to the standard of DL/T911 2004.
Application
1. During routine test of power transformer maintenance, our GDRZ-902 Transformer Sweep Frequency Response Analyzer SFRA is used to check the frequency response data of transformer winding.
2. When the power transformer leaves the factory, our GDRZ-902 Transformer SFRAt is used to measure the winding frequency response data of the transformer as the characteristic fingerprint information of the transformer.
3. After the power transformer is short-circuited, our GDRZ-902 Transformer Sweep Frequency Response Analyzer is used to measure the frequency response data of the power transformer and compare it with the test data before the short-circuit to check whether the transformer windings are deformed.
Specifications
| GDRZ-902 Transformer SFRA Sweep Frequency Response Analyzer | |
| Two different sweep modes: Linear sweep, Section sweep | |
| Linear sweep | 0.5KHZ-1MHZinterval 0.5KHZ 2000 dots |
Section sweep | 50HZ-100HZinterval 2HZ25 dots |
| 100HZ-1KHZinterval 20HZ45 dots | |
| 1KHZ -10KHZinterval 50HZ180 dots | |
| 10KHZ-100KHZinterval 0.2KHZ 450 dots | |
| 100KHZ – 500KHZ interval 0.5KHZ 800 dots | |
| 500KHZ – 1000KHZ interval 1KHZ500 dots | |
| Test range | (-100dB) - (+20dB) |
| Test accuracy | 0.1dB |
| Frequency accuracy | <0.01% |
| Signal input impedance | >1M Ω |
| Signal output impedance | 50 Ω |
Main Features
No need to connect to a laptop, a single machine can complete the frequency response transformer winding deformation test.
The sweep frequency range can reach 10HZ-10MHZ, the output frequency is stable, and the response attenuation multiplier has high measurement accuracy.
According to the test results, automatic production of standardized Word test reports.
Equipped with a micro printer to print test curves and data.
Automatic evaluation of test results in accordance with IEC60076-18.
7-inch large screen touch screen, full English menu interface, simple operation.
Our Partners
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com
