Call us!

Mobile/Whatsapp/Wechat:
+86 15123029885

Write to us!

Home » Products » High Voltage Tester » Partial Discharge Detector » GDJF-4 Handheld Partial Discharge PD Detector

loading

Share to:
sharethis sharing button

GDJF-4 Handheld Partial Discharge PD Detector

GDJF-4 Handheld Partial Discharge PD Detector is widely used in partial discharge detection of power system, including high voltage switchgear, ring network cabinet, voltage/current transformer, transformer (including dry type transformer), GIS, overhead line, cable and other equipment insulation state detection.
Through the partial discharge intensity detection and partial discharge frequency detection to measure the discharge degree of electrical equipment
Availability:
Quantity:
  • GDJF-4

  • CHONGQING GOLD

  • 9030849000

GDJF-4 

Handheld Partial Discharge PD Detector (with Discharge Patterns)


Partial Discharge Tester (5)

The front end of the mainframe is equipped with a non-contact ultrasonic sensor and a built-in TEV sensor. The detection of partial discharge of high and low voltage switchgear can be realized without external sensor. If it is necessary to detect partial discharge of transformer, GIS, overhead line, cable and other equipment, it is only necessary to connect the corresponding special sensor through the sensor expansion port at the bottom of the host. The host can automatically switch the measurement mode according to the different sensors. The sensors that can be externally connected to this product can refer to the optional part of Table 1 in the product configuration list.

Handheld Partial Discharge Detector

                                                               Table 1

Partial Discharge Detector (4)

1. Features

1) Configure different sensors to achieve partial discharge detection of almost all high-voltage electrical equipment;

2) Provide time domain waveform, PRPD, PRPS and other discharge patterns to realize the analysis of different discharge types.

3) Humanized man-machine interface facilitates data management of different devices;

4) Built-in ultrasonic sensor and transient ground voltage (hereinafter referred to as TEV) sensor, which can be connected with special sensors such as transformers, GIS, overhead lines, cables, etc.;

5) Adopts non-intrusive detection method, no need to power off during the test process, no need to configure additional high voltage source, it is more convenient to use than traditional pulsed partial discharge detector;

6) The test bandwidth range is 30kHz-2.0GHz, which is suitable for detection principles of various frequency bands;


2. Application


  • Power generation and power distribution enterprises.

  • Railway system.

  • Power supply system for petrochemical industry.

  • Aerospace testing.

  • Automatic detection


3. Technical Index


                                     TEV Measurement                                  AE Measurement
Measuring range

0-60 dBmV

Measuring range

-6dBμV - 68dBμV

Resolution

1dB

Resolution

1dB

Precision

±1dB Precision ±1dB

Maximum pulse per cycle

1400

Frequency Range 20-200 kHz

Measurement frequency band

3-100MHz

                                    AA measurement

                                      UHF measurement

Measuring range

-6dBμV-68dBμV

Detection frequency

300-2000MHz

Resolution

1dB

Measuring range

0-60 dBmV

Precision

±1dB

Sensitivity

<1dBm

Sensor center frequency

40 kHz

Sensor frequency band

300-2000MHz

                                                                                        HFCT measurement

Sensor transmission impedance

5mV/mA

Detection frequency

1-30MHz

Sensitivity

≤50pC

                                                                                                   Hardware

Shell

ABS
Screen

4.0 inch RGB LCD screen, resolution 800*480

Sampling accuracy

12bit

Synchronization mode

Internal synchronization, external synchronization

Connector

USB interface (also charger input)

3.5mm stereo headphone jack

External sensor input interface

Wifi

Earphone

8 Ω minimum

SD card

Standard configuration 16G - 64G

Built-in battery

3.7V/5000mAh lithium battery

Operating hours

Approxi. 6 hours

Charger

AC 90-264V or DC 5V


Partial Discharge Detector (2)

Our Partners

Partners

Contact us


Contact Person: Christine Gou

Whatsapp/Wechat: +86 15123029885

Mobile: +86 15123029885

E-mail: gold05@hy-industry.com


Previous: 
Next: 
Product Inquiry

QUICK LINK

PRODUCT LIST

CONTACT US

Phone : +86 15123029885
Add : Technical Central Building,Eco &Tech Dep Zone, Nan'an District, Chongqing,China
E-mail : gold05@hy-industry.com
Fax : 0086-23-62940030
Whatsapp : +8615123029885
Wechat : + 8615123029885
Copyright  Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd. All rights reserved. Site Map
公安备案号 50010802002590