English
 |
| Quantity: | |
|---|---|
GDMS-6
CHONGQING GOLD
9030849000
GDMS-6 Time Calibrator for Calibrate Time Relay,High Voltage Switch Tester
Introduction
High-voltage switch tester is generally divided into two types: with operating power and without operating power.
And without operating power is divided into the following two types: with relay and without relay. Those with relays are called "active" and those without relays are called "passive". With operating power high-voltage switch tester, the operating power to 110V or 220V, according to the requirements of the instrument to be tested after setting the "time calibrator" press "clear", after the operation of high-voltage switch tester and then the results are displayed, no operating power high-voltage switch tester "active", "passive" as above, but in the "passive" when you need to press the time calibrator button to close the switch before the results are displayed.
Specifications
Check time | 1ms - 500ms Bounce time: 1ms - 99ms |
Break port | six-way, or three-way output(optional) |
Resolution | 0.01ms error: 0.2% |
Built-in power supply | DC20V -------230V (error 1%) |
Environmental conditions | frequency 50HZ power: ≤ 20W maximum ≤ 2000W (instantaneous power) |
| It can output six or three different time parameters (different period) | |
40 sets of calibration data can be pre-stored | |
Our Partners
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com
GDMS-6 Time Calibrator for Calibrate Time Relay,High Voltage Switch Tester
Introduction
High-voltage switch tester is generally divided into two types: with operating power and without operating power.
And without operating power is divided into the following two types: with relay and without relay. Those with relays are called "active" and those without relays are called "passive". With operating power high-voltage switch tester, the operating power to 110V or 220V, according to the requirements of the instrument to be tested after setting the "time calibrator" press "clear", after the operation of high-voltage switch tester and then the results are displayed, no operating power high-voltage switch tester "active", "passive" as above, but in the "passive" when you need to press the time calibrator button to close the switch before the results are displayed.
Specifications
Check time | 1ms - 500ms Bounce time: 1ms - 99ms |
Break port | six-way, or three-way output(optional) |
Resolution | 0.01ms error: 0.2% |
Built-in power supply | DC20V -------230V (error 1%) |
Environmental conditions | frequency 50HZ power: ≤ 20W maximum ≤ 2000W (instantaneous power) |
| It can output six or three different time parameters (different period) | |
40 sets of calibration data can be pre-stored | |
Our Partners
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com
